• 18-19, Sector D, Mandideep Industrial Area, Mandideep, District : Raisen (M. P.) 462046
  • duconpaints@gmail.com

Product Detail

#

Acrylic Emulsion Lakshya: Interior Shine (20L)

₹4500₹3412

Acrylic emulsion Lakshya is formulated to provide long lasting beautiful finish to interior walls & available in matt/ shine finish. It gives rich look to your home. It gives better performance characteristics than Sparsh emulsions.

DUCON lakshya shine is interior emulsion paint is suitable for smooth and soft shine finish on walls.

It is a smart up-gradation of your home from distempers offering finish of plastic paint at a low cost. It gives higher coverage than distemper. It lasts for 3-4 years.

  • Formulated for extra coverage than distemper paint.
  • High opacity and shades retain brightness for long time.                   
  • More durability (3-4 years) than sparsh emulsion paint.
  • Smooth and rich matt/shine finish as per customer choice.
  • Moderate Washability.
  • Best in class sheen level
  • Very high whiteness and smooth finish 

Technical data /Product feature:

  • Sheen level : low 5-8 at 60 degree GH
  • Flash point : Not applicable as water based
  • Stability:  After thinning shall be used within 24 hours.
  • Drying Time: Approximately 30-45 minutes  based on climatic condition
  • Lead content: nil
  • Heavy metals : nil  
  • VOC content : As it is water based , it has lower VOC level than solvent based paints
  • Maintenance:  ensure proper washing and cleaning of fungus and algal growth once in a year to get best performance of paint.
  • Life durability: It is much higher than distemper paint. It can last up to 3-4 year with proper maintenance and on dry surface.
  • Washability : MEDIUM
  • Colours: White and several colours can be made as per request and as per chart. Only soft colors are made.
  • Anti Fungal : designed to prevent fungal growth on walls
  • Coverage:  For single coat coverage will be approx. 18-20 sq meter per liter when applied by brush followed by sponge roller on a smooth and non porous surface. With honey comb roller the coverage will be around 10 sq meters.  Coverage will vary according to method and condition of application and surface roughness and porosity.
  • Anti yellowing, less odor and irritation in eyes:  It is water based product and protects surface from yellowing.  As water is used as solvent it causes less odor or no irritation in eyes.
  • Stains: All water soluble stains can be easily removed.
  • Available sizes:  1,4,10,20 Ltr. Buckets

SURFACE PREPERATION:

New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

 CLEANING: Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Ducon shield to limit further dampness.

FILLING FOR CRACKS: For filling cracks up to 3mm use Ducon shield mixed with cement...

 FILLING FOR HOLES & DENTS: In case of dents and holes use DUCON Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.

For surfaces or substrates that are subjected to continuous seepage or dampness, kindly use Ducon shield as under coat.

Paint Application Process –new surface

 

Steps

process

thinner

Dilution

Time gap for next step

remarks

Step1

Sand the surface with 180 sand paper and wipe clean

 

 

 

Ensure surface is dry

Step2

Ducon primer  Brush/roller

RO water

20-30%

6-8 hours

 

Step3

Ducon wall putty

RO water

Qty so that material flows

4-6 hours

 

Step 4

Ducon primer brush/roller

RO water

20-30%

 

6-8 hours

 

Step 5

Sand the surface using emery paper 320 and wipe clean

 

 

 

 

Step6

First coat of ducon emulsion

RO water

30-40%

4-6 hours

 

Step 7

Second coat of ducon acrylic emulsion

RO water

30-40%

4-6 hours

 

Note: if surface is old and painted ensure that old paint is washed off properly and surface is dried.

Precautions /care:

  • Surface shall be dry, free from seepage or dampness. If surface is not free then use dampness protector from Dr Fixit or equivalent.
  • All cracks shall be filled by proper sealant.
  • Holes and dents shall be filled by using Ducon white cement based wall care putty. Do not use chemical based putty.
  • Surface shall be free from loose paint, dirt or grease.
  • Fungus, algae or moss shall be removed by wire brush and water.
  • Do not dilute paint for more than 20-30% using water for smooth surface. For Grained (Dana Pattern) surface do not dilute paint.
  • Stir well before use.
  • Do not apply when ambient temperature is low say below 8 degree centigrade.

Safety precautions:

  • No added lead or mercury or heavy metals.
  • Do not pour left over paint down the drain or water bodies.
  • Store the container in cool and dry place vertically with lid tightly closed.
  • Keep out of reach of children and away from eatables.
  • Do not spray in kitchen with uncovered eatables/fruits etc.
  • May be harmful if swallowed. Immediate medical attention is recommended.
  • Apply with wearing suitable nose pad. Do not breathe vapour or spray.
  • In case of skin contact was skin with soap and fresh water.
  • Wear eye protection. In case of contact with eyes, rinse immediately with plenty of water. If irritation persists take immediate medical attention.

Latest Products

What Clients Say?

Here are testimonials from clients..

#

REQUEST FOR FURTHER INFORMATION

Get answers and advice from people you want it from.

  • #
  • #
  • #
  • #
  • #