• 18-19, Sector D, Mandideep Industrial Area, Mandideep, District : Raisen (M. P.) 462046
  • duconpaints@gmail.com

Product Detail


Acrylic Emulsion Sparsh : Interior (20L)


Acrylic emulsion Sparsh is economy range of emulsion, which gives matt finish. It gives much better life than distemper.

Ducon sparsh  Economy Emulsion  is the easiest way to upgrade from distempers. It offers finish of a plastic paint at a cost very near to distemper. It gives a coverage higher than Distemper, hence require less material. It also lasts for at least 2-3 years, so you don't have to paint the walls every year.

  • High whiteness
  • More coverage (1.4-1.5 times) than distemper.
  • High opacity and shades retain brightness for long time.
  • Unmatched durability in economic range (2-3 years).
  • Value for money.
  • Lower  washability

Technical data /Product feature:

  • Sheen level : MATT FINISH
  • Flash point : Not applicable as water based
  • Stability:  After thinning shall be used within 24 hours.
  • Drying Time: Approximately 30-45 minutes  based on climatic condition
  • Lead content: nil
  • Heavy metals : nil  
  • VOC content : As it is water based , it has lower VOC level than solvent based paints
  • Maintenance:  ensure proper washing and cleaning of fungus and algal growth once in a year to get best performance of paint.
  • Life durability: It is much higher than distemper paint. It can last up to 2-3 year with proper maintenance and on dry surface.
  • Washability : MEDIUM
  • Colours: White and several colours can be made as per request and as per chart.
  • Anti Fungal : designed to prevent fungal growth on walls
  • Coverage:  For single coat coverage will be approx. 220-240 sq ft  per liter when applied by sponge roller on a
  • smooth and non porous surface. With honey comb roller the coverage will be around  120-140  sq feet per liter.Coverage will vary according to method and condition of application and surface roughness and porosity.
  • Anti yellowing, less odor and irritation in eyes:  It is water based product and protects surface from yellowing.  As water is used as solvent it causes less odour or no irritation in eyes.
  • Stains: All water soluble stains can be easily removed.
  • Available sizes:  1,4,10,20 Ltr. Buckets


New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

 CLEANING: Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed

by wire brushing and water. In case of areas having excessive dampness use Ducon shield  to limit further dampness.

FILLING FOR CRACKS: For filling cracks upto 3mm use  Ducon shield mixed with cement..

 FILLING FOR HOLES & DENTS : In case of dents and holes use DUCON  Acrylic Wall Putty or white cement and fine sand in the ratio 1:3 .

For interior surfaces or substrates that are subjected to continuous seepage or dampness, kindly use Ducon shield as under coat.

Paint Application Process –new surface





Time gap for next step



Sand the surface with 180 sand paper and wipe clean




Ensure surface is dry


Ducon primer  Brush/roller



6-8 hours



Ducon wall putty


Qty so that material flows

4-6 hours


Step 4

Ducon primer brush/roller




6-8 hours


Step 5

Sand the surface using emery paper 320 and wipe clean






First coat of ducon emulsion



6-8 hours


Step 7

Second coat of ducon acrylic emulsion



6-8 hours


Note: if surface is old and painted ensure that old paint is washed off properly and surface is dried.

Precautions /care:

  • Surface shall be dry, free from seepage or dampness. If surface is not free then use DUCON SHIELD  or equivalent.
  • All cracks shall be filled by proper sealant.
  • Holes and dents shall be filled by using DUCON WHITE CEMENT OR POLYMER  based wall care putty. Do not use chemical based putty .
  • Surface shall be free from loose paint, dirt or grease.
  • Fungus, algae or moss shall be removed by wire brush and water.
  • Do not dilute paint for more than 20-30% using water for smooth surface. For Grained (Dana Pattern) surface do not dilute paint.
  • Stir well before use.
  • Do not apply when ambient temperature is low say below 8 degree centigrade.

Safety precautions:


  • No added lead or mercury or heavy metals.
  • Do not pour left over paint down the drain or water bodies.
  • Store the container in cool and dry place vertically with lid tightly closed.
  • Keep out of reach of children and away from eatables.
  • Do not spray in kitchen with uncovered eatables/fruits etc.
  • May be harmful if swallowed. Immediate medical attention is recommended.
  • Apply with wearing suitable nose pad. Do not breathe vapour or spray.
  • In case of skin contact was skin with soap and fresh water.
  • Wear eye protection. In case of contact with eyes, rinse immediately with plenty of water. If irritation persists take immediate medical attention.

Latest Products

What Clients Say?

Here are testimonials from clients..



Get answers and advice from people you want it from.

  • #
  • #
  • #
  • #
  • #