• 18-19, Sector D, Mandideep Industrial Area, Mandideep, District : Raisen (M. P.) 462046
  • duconpaints@gmail.com

Product Detail

#

Acrylic Wall Putty : Glo (20 Kg)

₹1150₹807

Acrylic putty is polymer based putty and it is 100% water proof. It is best for interior and external walls to give smoothness to the surface and to fill cracks. In this putty cracks are not developed under different weather conditions. It can be used o

Acrylic wall putty is water based best available product of its kind. It provides a very strong and durable foundation and gives best performance of the final finish coats both in looks and durability.

Product benefits:

  • Fungus resistant
  • It provides Smooth, shineing  and even wall finishes  to emulsion paints.
  • Water resistant
  • It is water based ready to use putty.
  • Used for filling and smoothening of cracks and dents on wall surfaces.
  • Made of special acrylic binders retaining strong and firm grip on the plastered surface , increasing the life of paint film
  • Manufactured using special equipment to ensure consistency and smoothness. It gives rich look to emulsion paint.
  • It enhances the breathability and reduces pores compared to powder putty , hence reducing chances of salt coming out from the surfaces
  • It is quick drying.
  • It has better alkali resistance making it more suitable for new walls.

 

AVAILABLE PACK SIZES:

1 KG BOX PACKING, 10 AND 20 KG BUCKET PACKING.

Drying time to touch:

20-30 minute in summers, 45-60 min in winter and rainy season

Recommended usage:

Can be used on plastered walls, wood, glass and asbestos surfaces. Can also be used on brick walls and concrete walls.

Technical data:

  • Coverage: 1 coat 40-50 sq. ft. /kg, 2 coat 25-30 sq. ft. per kg
  • Sheen level: 15-25 at 35 deg GH
  • Flash point: NA as water based
  • Shelf life: 2 years if kept in dry and cool area. It shall not be stored above 40 degree centigrade.

 

How to apply:

A: SURFACE PREPERATION

New masonry surfaces must be cured completely. Min one month curing time is recommended after plaster for surface to completely dry out.

Old surfaces shall be free from any loose paint, dust, grease and oil. Growths of fungus, algae, moss etc. shall be removed by wire brush and water. Damp surfaces shall be treated using Ducon shield to limit further dampness.

 All cracks up to 3 mm shall be filled with crack sealer or ducon shield mixed with cement. For filling dents and holes use ducon acrylic wall putty or white cement and fine sand in the ratio of 1:3 and mixed with small qty of shield.

B: APPLICATION PROCESS

  • SAND THE SURFACE WITH 180 NUMBER SAND PAPER AND WIPE CLEAN.
  • ADD WATER IF REQUIRED AND APPLY ONE COAT BY PUTTY KNIFE.
  • AFTER 4-6 HOURS APPLY SECOND COAT.

PRECAUTIONS

  • Do not over thin or over extend the brush
  • Use within 24 hours after thinning.
  • Do not apply if ambient is less than 10 degree centigrade
  • Stir well before use.

Safety precautions :

  • Store in cool and dry place in upright position
  • Keep out of reach of children and away from eatables
  • May be harmful if swallowed. In case of ingestion , please seek immediate medical attention.
  • Wear eye protection during application. In case of contact with eye rinse immediately with plenty of water and seek medical advice.
  • Do not pour leftover paint down the drain or in water courses
  • Wash skin in case of contact with skin.

Latest Products

What Clients Say?

Here are testimonials from clients..

#

REQUEST FOR FURTHER INFORMATION

Get answers and advice from people you want it from.

  • #
  • #
  • #
  • #
  • #