• 18-19, Sector D, Mandideep Industrial Area, Mandideep, District : Raisen (M. P.) 462046
  • duconpaints@gmail.com

Product Detail


Ducon Acrylic Primer : Interior (20L)


Ducon Wall Primer sets fast, has good sealing properties, good resistance to wall alkalinity, moisture and fungus. It is available in Interior and Exterior varieties.

Ducon  Wall Primer  is suitable for use as a primer for masonry topcoats like distemper, emulsions, shine and matt wall finishes. It helps in providing a suitable surface for application of subsequent coats of putty and finish paint.

Technical data /Product feature:

  • Sheen level : MATT FINISH
  • Flash point : Not applicable as water based
  • Stability:  After thinning shall be used within 24 hours.
  • Drying Time: Approximately 30-45 minutes  based on climatic condition
  • Lead content: nil
  • Heavy metals : nil  
  • VOC content : As it is water based , it has lower VOC level than solvent based paints
  • Maintenance:  ensure proper washing and cleaning of fungus and algal growth once in a year to get best performance of paint
  • Colours: White  only . other colour on special request.
  • Anti Fungal : designed to prevent fungal growth on walls

Coverage:  For single coat coverage will be approx. 120-130 sq ft  per liter when applied by sponge roller on a smooth and non porous surface. With honey comb roller the coverage will be around  70-80  sq feet per liter.  Coverage will vary according to method and condition of application and surface roughness and porosity.

  • Anti yellowing, less odor and irritation in eyes:  It is water based product and protects surface from yellowing.  As water is used as solvent it causes less odour or no irritation in eyes.
  • Stains: All water soluble stains can be easily removed.
  • Available sizes:  1,4,10,20 Ltr. Buckets


New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

 CLEANING: Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Ducon shield  to limit further dampness.

FILLING FOR CRACKS: For filling cracks upto 3mm use  Ducon shield mixed with cement..

 FILLING FOR HOLES & DENTS : In case of dents and holes use DUCON  Acrylic Wall Putty or white cement and fine sand in the ratio 1:3 .

For interior surfaces or substrates that are subjected to continuous seepage or dampness, kindly use Ducon shield as under coat.

Paint Application Process –new surface





Time gap for next step



Sand the surface with 180 sand paper and wipe clean




Ensure surface is dry


Ducon primer  Brush/roller



6-8 hours




Ducon wall putty


Qty so that material flows

4-6 hours


Step 4

Ducon primer brush/roller




6-8 hours


Note: if surface is old and painted ensure that old paint is washed off properly and surface is dried.

Precautions /care:

  • Surface shall be dry, free from seepage or dampness. If surface is not free then use DUCON SHIELD  or equivalent.
  • All cracks shall be filled by proper sealant.
  • Holes and dents shall be filled by using DUCON WHITE CEMENT OR POLYMER  based wall care putty. Do not use chemical based putty .
  • Surface shall be free from loose paint, dirt or grease.
  • Fungus, algae or moss shall be removed by wire brush and water.
  • Do not dilute paint for more than 20-30% using water for smooth surface. For Grained (Dana Pattern) surface do not dilute paint.
  • Stir well before use.
  • Do not apply when ambient temperature is low say below 8 degree centigrade.

Safety precautions:

  • No added lead or mercury or heavy metals.
  • Do not pour left over paint down the drain or water bodies.
  • Store the container in cool and dry place vertically with lid tightly closed.
  • Keep out of reach of children and away from eatables.
  • Do not spray in kitchen with uncovered eatables/fruits etc.
  • May be harmful if swallowed. Immediate medical attention is recommended.
  • Apply with wearing suitable nose pad. Do not breathe vapour or spray.
  • In case of skin contact was skin with soap and fresh water.
  • Wear eye protection. In case of contact with eyes, rinse immediately with plenty of water. If irritation persists take immediate medical attention.

Latest Products

What Clients Say?

Here are testimonials from clients..



Get answers and advice from people you want it from.

  • #
  • #
  • #
  • #
  • #